QWhat is the height from the tray deck to the top of the drop sides on an aluminum tray with 225mm drop sides?

253mm

QWhat is the distance between the head board ears?

On a 1842mm tray with a square headboard it is 1830mm

QWhat is the diameter of the tube used on a tube headboard?

63.5mm (or 2.5") With respect to tube thickness, Aluminium tubes are 3.2mm, Steel tubes are 2mm.

QWhat are the internal dimensions of Triple M trays?

For internal widths, subtract the value below from overall tray width:

Aluminium – 50mm. (1842 – 50 = 1792mm) ; Steel – 60mm. (1840 – 60 = 1780mm)

QHow high does the headboard extend above the cab?

Approximately 40mm (this figure may vary slightly, depending on your particuler vehicle)

QIs a ladder rack the same height as the headboard?

No. The ladder rack is 55mm lower than the headboard. This is done to elevate objects above the cab in order to prevent damage.

QWhat size tray can be fitted to a Single cab Hilux? (2005 model onwards)

2550mm long x 1842mm wide

(Available through Genuine program only)

QWhat is the load capacity of a TM ladder rack?

150kgs, This is the combined load for the headboard & rear rack. Note: the driver is responsible for the correct loading of the vehicle to ensure safe operation. Although the rack can carry 150kgs, we do not warrant it is always safe to do so.

QCan I have 303 dropsides with a tubular headboard?

Sorry, no. The bend angle of the tube headboard does not give us enough height to fit the latches needed to hold the dropside in place.